Compound bow draw lengths and draw weights
Hi guys.
So when it comes to draw length I heard a lot of people say "if the draw length doesn't suit you.. Well just take it to an archery shop and they'll swap the cams free of charge" is it really that easy? Also are the cams and modules the same thing? What do you actually need to change on the bow in order to change the draw length?
Now when it comes to draw weight (let's just use the hoyt Crx32 as an example) if you look at compoundbowchoice.com etc... You see the the draw weight is 40-80lbs but when you read the specifications sticker on the bow it says 60-70lbs..? Please explain
Now sorry for all the "common sense" questions but I'm really no master in the _technical_ side of archery
Thanks in advance for your feedback.
Re: Compound bow draw lengths and draw weights
In your example of the CRX, they’re available from 40-80lbs in 10lb increments so 40-50, 50-60, 60-70 and 70-80. I recall some manufacturers also offering 55-65 and 65-75lbs. Then on the draw length. It depends from model to model, some only need an adjustment on the cam, some need new modules and others need a complete new cam or cams. I would avoid buying an older used bow that would need to have cams changed because in SA it’s quite possible that you won’t find stock and if you do, you’re going to have to dig deep to pay for them.
Re: Compound bow draw lengths and draw weights
The three best supported brands in SA would be Mathews, Bowtech and Hoyt. If you looking at a second hand model of the above, check with Archers Edge for Bowtech /Mathews parts and Magnum archery for Hoyt.
4 Attachment(s)
Re: Compound bow draw lengths and draw weights
OK so I have a hoyt turbohawk that I believe is currently 26-27" draw length... I'm going to try and attach a few pictures of either side of both wheels... Please let me know cost where and how will I manage to change it to a 29-30" draw length (so basically what do i do to get it to a 29-30"?)
Attachment 31198
Attachment 31196
Attachment 31195
Attachment 31197
Re: Compound bow draw lengths and draw weights
aghhh and i forgot to say a big thank you to Antlion and Bowhunter for their time and for helping out so far its really much more appreciated then you think
Re: Compound bow draw lengths and draw weights
You will need to change the whole cams and possibly strings too. Looks like the XR2 cam only goes to 27 1/2” draw. Contact Magnum Archery.
https://s3.hoyt.com/uploads/2019/b58...96adac0e22.pdf
Re: Compound bow draw lengths and draw weights
Thanks.. Any idea on the total cost to do the change over?
Re: Compound bow draw lengths and draw weights
Ahaa one last question.. On the specifications sticker on the bow it says 60-70lbs but when I weighed it last night on my scale it was giving me 45lbs after tightening it up to maximum it gave me 70lbs
So is it possible for the hoyt turbohawk to be a 40-70lbs?? (well even if it's not possible mine is special);D
Re: Compound bow draw lengths and draw weights
Quote:
Originally Posted by
destroyer
Ahaa one last question.. On the specifications sticker on the bow it says 60-70lbs but when I weighed it last night on my scale it was giving me 45lbs after tightening it up to maximum it gave me 70lbs
So is it possible for the hoyt turbohawk to be a 40-70lbs?? (well even if it's not possible mine is special);D
Not sure on cost. You can also check with Magnum regarding the draw weight.
Re: Compound bow draw lengths and draw weights
Did you measure the draw weight after the let of? Remember most compound bows have a % loss at full draw to help you aim and hold the bow at full draw. On my bow i can adjust the amount of let off with the draw lenght modules for the cams.