Low Shooting Air Rifle

[gary-t]

Thanks all.

Both mounts identical and swapped, no difference.

The rings came standard with a piece of "sticky rubber" tape at the bottom of the rings. I plan on removing this.

I would suggest having the rubber or a ship at the bottom of the rear mount and at the top of the front mount. This will change the alignment of the scope and lift your point of impact.

[Jerkimiah]

I had a similar problem on my FX Wildcat mk3
Half the problem was crappy mount, fitted "High" Discovery "fixed mounts" got rid of the adjustable ones
The other half was that I "shimmed" the rear mount (at the bottom) using that sticky aluminum tape, found that 2 layers was good.
Wound my elevation turrent to it's stop on one side, wound it back to the other side, counted the revs divided by 2 and did the same for windage
Optical centre was found, was easy peasy to set scope in with minor adjustments
Always set my scope in at 20m, as this is the space I have at home, 25m is better