Page 1 of 2 1 2 LastLast
Results 1 to 10 of 12
  1. #1
    User
    Join Date
    Jul 2008
    Location
    Pretoria
    Age
    43
    Posts
    596

    Default Converted to tupperware - Glock 19

    Im in the fortunate position to get a brand new Glock 19 as a present. I will be using it fot IPSC because I already have a Vektor SP1 for SD.
    I have heard some talk about a "Striker spring" that is red or blue and want to find out which one is best. Also would like to know what I can do in terms of sigths, mag release and so on to make it a better Firearm that it is already.

    It will also used for occasional SD carry as the verktor is a bit on the heavy side.

  2. #2
    Moderator SSP's Avatar
    Join Date
    Jul 2008
    Posts
    11,988

    Default Re: Converted to tupperware - Glock 19

    The blue spring is designed for NATO spec ammo. Its unnecessary with commercial primers. I'd get the red spring for added reliability on my SD gun. It adds a little to the trigger pull.

    The sights are crap.

    The mag release is fine. Leave it alone.

    Mecca for all things Glock. www.glockparts.com
    Cattle die, kindred die, every man is mortal:
    But I know one thing that never dies,
    the glory of the great dead.
    Havamal

  3. #3
    User
    Join Date
    Jul 2008
    Age
    46
    Posts
    29,307

    Default Re: Converted to tupperware - Glock 19

    Congrats on the 19

    I agree with SSP.

    The stock sights are little more than slot fillers I would suggest replacing them with Heinies or Warrens.

    The red spring does help with harder primers but my preference is the Wolff extra power striker spring. Doesn't effect the trigger as much and works well in both my Glocks.

    I would leave the stock mag release alone and would definitely stay away from the factory extended unit as it is easily accidental activated and eats my left hand. If after a couple of thousand repetitions you absolutely cant reach I believe Tango Down does the very slightly extended Vickers release.

    I personally prefer the factory 2kg connector but it wouldn't be a deal breaker.

  4. #4

    Default Re: Converted to tupperware - Glock 19

    let me jump in here, everyone (and i do mean everyone) has been quoted on here saying that the stock Glock sights are crap, slot fillers and ball breakers (ok maybe not the last one).

    I like the standard config sights on the Glock. I like them so much that i used mine untill one day i got bee in my bonnet and then changed them out for the Glock steel sights, identical tot he standard in every way except that they are steel instead of rubber, to be honest, it was just a thing i thought to do, as the current, factory sights were doing fine, i like the standard sights, so now i ask all of you.....

    What is the problem with the standard Glcok sights???

    is it that you guys dont like the "dot" in the middle of the "u"

    or because they are rubber ???

  5. #5
    Moderator ikor's Avatar
    Join Date
    Aug 2008
    Age
    74
    Posts
    8,806

    Default Re: Converted to tupperware - Glock 19

    Well, Andy, my problems with them are twofold. First, they break...as in the front sight breaking off of the slide. I have seen this over 20 times at the least, and they do it worst with LE type security holsters...CCW rigs, not so much. Second, the little short, fat bastages are difficult for me to pick up quickly in the too small rear 'window'...all the more so as my eyes get older. You can, BTW simply turn them around if you prefer plain black sights to the U and dot.

    I like the Heinie sights...have a set on my old G19 now and will get another for my new one later with the wider rear notch. I have a set of Trijicons on my G17 but wish I had opted for Heinies there as well. I have never seen a set of Warrens but I sure would like to.

    I don't know you but my guess is that your eyes are still young...enjoy them while you can. Once you begin to reach 'old fart' status, things are gonna change for you, my man...like you would not believe. ;D
    Run Fast, Bite Hard!

  6. #6
    Moderator Thorkind's Avatar
    Join Date
    Jul 2008
    Age
    50
    Posts
    3,244

    Default Re: Converted to tupperware - Glock 19

    +1 on Ikor's post. In addition, the front sight edges start to "round" off after a while. IMHO, they suck. There are plenty of far superior designs on the market. I have both Heinies and Warren tacticals, and you can't even begin to compare how big an improvement they are compared to standard Glock sights.
    Because a thing seems difficult to you, do not think it impossible for anyone to accomplish - Marcus Aurelius

  7. #7

    Default Re: Converted to tupperware - Glock 19

    Agree with Ikor.

    The plactic/rubber sights just do not last and I am not a big fan of that white 'u' at the back.

  8. #8

    Default Re: Converted to tupperware - Glock 19

    ok fair enough then, i dont usually carry my Glock in holster, so i would not have had the front sight rounding off or breaking on retention holsters etc, i do quite like the "U" set up in favour of the three dot sight picture, to me the three dot is too busy for a lightning fast aquisition. i would prefer the "U" or the "dot the 'i'" sights that guns like the Sig employ, when buying night sights in the three dot config, i always get the rear in a orange and front in green as Green is brighter int he night sight i find, and therefore is the most visable int he dark, and that all i want to put is my front sight on target in a rush.

    Ikor i am still young(ish) and do have 20/20 vision, but i thought that the Glock sights would be even more easier to read as the lines are white and large enough to see and pick up easier then the usual, i think so anyhow...

  9. #9
    Moderator SSP's Avatar
    Join Date
    Jul 2008
    Posts
    11,988

    Default Re: Converted to tupperware - Glock 19

    I don't like how the plastic front sight peenes outward at it's top edge. The rear notch is too narrow on the std plastic rear and they get rounded and shiny with carry.
    Cattle die, kindred die, every man is mortal:
    But I know one thing that never dies,
    the glory of the great dead.
    Havamal

  10. #10
    Moderator ikor's Avatar
    Join Date
    Aug 2008
    Age
    74
    Posts
    8,806

    Default Re: Converted to tupperware - Glock 19

    Actually, Andy, when you think about it, having a design on the rear sight...when we all know that it is the front sight we should focus on for accuracy...is a bit silly. Lining up the standard U and dot (or two dots or three, etc.) will almost never result in best accuracy because 'shooting the dots' as we call it, leaves the front sight too high, since the front dot (assuming you see the whole dot), by necessity, must be below the top of the sight.

    I have found that a plain black rear, combined with a front blade with tritium dot works very well for me, and is cheaper to boot...in fact, you could do halfway decent work at close range without any rear sight at all...especially with a pistol you have shot regularly...but never without a front sight. Having said that, however, I think that probably the best colored sights I have ever used for daylight shooting were / are the orange front insert / white outline rear S&W revolver sights. Even those, however, have the same issues with POA / POI being off, but they were adjustable via screws.
    Run Fast, Bite Hard!

Page 1 of 2 1 2 LastLast

Similar Threads

  1. Tupperware Porn
    By Pivo in forum Equipment & Accessories
    Replies: 11
    Last Post: 27-04-2014, 08:15
  2. Converted.
    By HoggerNaut in forum General Discussion
    Replies: 15
    Last Post: 15-08-2011, 13:43
  3. Tupperware or Steel?
    By zonk in forum SAPSF Discussions
    Replies: 4
    Last Post: 18-03-2011, 14:49
  4. Preaching to the converted..
    By THOMAST in forum General Firearm Discussion
    Replies: 12
    Last Post: 01-03-2010, 10:50
  5. ACHTUNG - Tupperware Brigade: Help needed.
    By BoerBok in forum Handguns
    Replies: 30
    Last Post: 10-11-2008, 10:45

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •