Results 1 to 10 of 21
-
16-02-2014, 14:36 #1
Daniel Defense DDM4 stock arriving soon - The following will be available
We have some of each of the following Daniel Defense M4 Carbines versions arriving within the next few weeks that will be available. Quantities are very limited, so give us a call soon to ensure you get the version you want.
Drop us an email at sales@hbasa.co.za or call 012 754 0777 for more details.
DANIEL DEFENSE M4 CARBINE, V5 (NO SIGHTS)
Estimated price of TBC
MATERIALS & CONSTRUCTION
You asked and we listened. The Daniel Defense M4 Carbine, v5 is perfectly adapted for end-users who plan on attaching the ever popular red dot, holographic or magnified optics to their firearm. The slick top monolithic upper receiver provides operators with valuable top rail real estate for accessories that fit their shooting needs.
Daniel Defense was always apprehensive about releasing a factory made firearm with a set or clap style gas block. Therefore the Daniel Defense M4 Carbine, v5 is equipped with a single pinned low profile gas block that is drilled, taper rimed, and press fit into place to securely attach the low profile gas block to the barrel assembly. This creates a rock solid platform that will never let you down.
Precision crafted from the highest quality material available today with meticulous attention to detail, The Daniel Defense M4 Carbine will prove to be the benchmark in the industry.
- Lower Receiver: Mil-Spec with Enhanced Flared Magazine Well and Rear Receiver QD Swivel Attachment Point
- Upper Receiver: Mil-Spec with Indexing Marks and M4 Feed Ramps
- Barrel: Chrome Moly Vanadium Steel, Cold Hammer Forged, 1:7 twist, 16″ Govt Profile, Mid-length Gas System, Chrome Lined, MP tested, and Mil-Spec Heavy Phosphate coated
- Chamber: 5.56 NATO
- Flash Hider: Daniel Defense Flash Suppressor (1.875")
- Bolt Carrier Group: Mil-Spec MP Tested, Properly Staked Gas Key
- Buffer: H Buffer
- Gas Block: Daniel Defense Pinned Low Profile Gas Block
- Handguard: Daniel Defense DDM4 Rail™ 12.0
- Buttstock: MAGPUL MOE Buttstock & Mil-Spec Receiver Extension
- Magazine: MAGPUL 30 round PMag in Black
- Vertical Grip: Daniel Defense A2 Styling Vertical Grip
- Rail Cover: (3) Daniel Defense low profile rail ladders
- Case: Comes with Custom Daniel Defense Full-Latch Impact Plastic Case
- Weight: 6.35lbs
- Made in the USA!
DANIEL DEFENSE M4 CARBINE, V5 LW (NO SIGHTS, LIGHTWEIGHT BARREL)
Estimated price of TBC
You asked and we listened. The Daniel Defense M4 Carbine, v5 Lightweight is perfectly adapted for end-users who plan on attaching the ever popular red dot, holographic or magnified optics to their firearm. The slick top monolithic upper receiver provides operators with valuable top rail real estate for accessories that fit their shooting needs.
The Daniel Defense M4 Carbine, v5 Lightweight is equipped with a single pinned low profile gas block that is drilled, taper rimed, and press fit into place to securely attach the low profile gas block to the barrel assembly. This creates a rock solid platform that will never let you down.
MATERIALS & CONSTRUCTION
Precision crafted from the highest quality material available today with meticulous attention to detail, The Daniel Defense M4 Carbine will prove to be the benchmark in the industry.
- Lower Receiver: Mil-Spec with Enhanced Flared Magazine Well and Rear Receiver QD Swivel Attachment Point
- Upper Receiver: Mil-Spec with Indexing Marks and M4 Feed Ramps
- Barrel: Chrome Moly Vanadium Steel, Cold Hammer Forged, 1:7 twist, 16″ Lightweight Profile, Mid-length Gas System, Chrome Lined, MP tested, and Mil-Spec Heavy Phosphate coated
- Chamber: 5.56 NATO
- Flash Hider: Daniel Defense Flash Suppressor (1.875")
- Bolt Carrier Group: Mil-Spec MP Tested, Properly Staked Gas Key
- Buffer: H Buffer
- Gas Block: Daniel Defense Pinned Low Profile Gas Block
- Handguard: Daniel Defense DDM4 Rail™ 12.0
- Buttstock: MAGPUL MOE Buttstock & Mil-Spec Receiver Extension
- Magazine: MAGPUL 30 round PMag in Black
- Vertical Grip: Daniel Defense A2 Styling Vertical Grip
- Rail Cover: (3) Daniel Defense low profile rail ladders
- Case: Comes with Custom Daniel Defense Full-Latch Impact Plastic Case
- Weight(no sights): 6lb 5oz
- Made in the USA!
DANIEL DEFENSE M4 CARBINE, V7 (NO SIGHTS)
Estimated price of TBC
The Daniel Defense v7 is one of our latest additions to our M4 rifle family. With the incorporation of our new Modular Float Rail (MFR) 12.0, this rifle provides each shooter with the ultimate in modular adaptability. Should the shooter desire, the tube can be run “slick” with an uninterrupted top rail that runs the length of the tube. In addition, the 3” Modular Picatinny Rail sections allow the shooter to customize the rail set up.
The v7 is equipped with a single pinned low profile gas block that is drilled, taper rimed, and press fit into place to securely attach the low profile gas block to the barrel assembly. This creates a rock solid platform that will never let you down.
Materials & Construction
Precision crafted from the highest quality material available today with meticulous attention to detail, The Daniel Defense M4v7 will prove to be the benchmark in the industry.
- Upper Receiver: Mil-Spec with Indexing Marks and M4 Feed Ramps
- Lower Receiver: Mil-Spec with Enhanced Flared Magazine Well and Rear Receiver QD Swivel Attachment Point
- Barrel: 4150 Chrome Moly Vanadium Steel, Cold Hammer Forged, 1:7, 16″ Govt Profile, Mid-length Gas System, Chrome Lined, Mil-Spec Heavy Phosphate coated, and HP/MPI tested
- Chamber: 5.56 NATO
- Length: 32.636 Collapsed
- Flash Hider: Daniel Defense Flash Suppressor (1.875")
- Bolt Carrier Group: Mil-Spec MP Tested, Properly Staked Gas Key
- Gas Block: Daniel Defense Pinned Low Profile Gas Block
- Handguard: Daniel Defense Modular Float Rail 12.0
- Rail Sections: 3 Picatinny Modular Rail Sections
- Made in the USA!
DANIEL DEFENSE M4 CARBINE, V7 LW (NO SIGHTS, LIGHTWEIGHT BARREL)
Estimated price of TBC
The Daniel Defense v7 Lightweight is one of our latest additions to our M4 rifle family. With the incorporation of our new Modular Float Rail (MFR) 12.0, this rifle provides each shooter with the ultimate in modular adaptability. Should the shooter desire, the tube can be run “slick” with an uninterrupted top rail that runs the length of the tube. In addition, the 3” Modular Picatinny Rail sections allow the shooter to customize the rail set up.
The v7 is equipped with a single pinned low profile gas block that is drilled, taper rimed, and press fit into place to securely attach the low profile gas block to the barrel assembly. This creates a rock solid platform that will never let you down.
Materials & Construction
Precision crafted from the highest quality material available today with meticulous attention to detail, The Daniel Defense M4v7 will prove to be the benchmark in the industry.
- Upper Receiver: Mil-Spec with Indexing Marks and M4 Feed Ramps
- Lower Receiver: Mil-Spec with Enhanced Flared Magazine Well and Rear Receiver QD Swivel
- Attachment Point
- Barrel: Chrome Moly Vanadium Steel, Cold Hammer Forged, 1:7, 16″ Lightweight Profile, Mid-length Gas System, Chrome Lined, MP tested, and Mil-Spec Heavy Phosphate coated
- Chamber: 5.56 NATO
- Length: 32.636 Collapsed
- Flash Hider: Daniel Defense Flash Suppressor (1.875")
- Bolt Carrier Group: Mil-Spec MP Tested, Properly Staked Gas Key
- Gas Block: Daniel Defense Pinned Low Profile Gas Block
- Handguard: Daniel Defense Modular Float Rail 12.0
- Rail Sections: 3 Picatinny Modular Rail Sections
- Made in the USA!
And a final word on Daniel Defense's barrels:
Cold Hammer Forging of barrels has been known for decades to produce the most accurate, longest lasting rifle barrels obtainable. The Cold Hammer Forging of barrels is accomplished through intense hydraulic pressure applied at opposing angles by carbide steel hammers. During the hammering process, a mandrel is inserted into the bore while the carbide steel hammers shape the barrel around the mandrel creating the chamber, the lands, and the grooves. In addition to the aforementioned benefits, the Cold Hammer Forging process creates a defect free bore and the most consistent chamber possible.
All Daniel Defense cold hammer forged barrels are made from start to finish in our state-of-the-art facility located in Black Creek, GA. In keeping with our heritage of not cutting corners, all cold hammer forged barrels feature a forged chamber and heavy phosphate exterior coating. They are all MP tested on-site and are available in multiple configurations which includes barrel only (stripped); barrel with Front Sight Base; barrel with Low Profile Gas Block; and barrel with Front Sight Base, gas tube, and delta Ring assembly (Complete). These barrels will prove themselves to be more accurate and last longer than a barrel that has cut or button rifling.
Visit Daniel Defense for more information: https://danieldefense.com/
All Firearms sales to comply with Firearms Control Act and CFR regulations. WACS is a licensed fire arms dealer.
Last edited by HBA; 16-02-2014 at 14:59.
-
16-02-2014, 14:46 #2
- Join Date
- Oct 2012
- Location
- At the Mountain
- Posts
- 5,551
Re: Daniel Defense DDM4 stock arriving soon - The following will be available
Am I right R15 k secures?
-
16-02-2014, 20:00 #3
- Join Date
- Sep 2013
- Posts
- 322
Re: Daniel Defense DDM4 stock arriving soon - The following will be available
Any 300 AAC blackout DDM4's ?
-
16-02-2014, 22:14 #4
- Join Date
- Jul 2008
- Location
- Not where I want to be..
- Posts
- 12,596
Re: Daniel Defense DDM4 stock arriving soon - The following will be available
uBestRi - Deposits were required for special orders and pre-orders. You only need to contact Jacques to get your name on the list. A serial number will only be allocated to you upon payment of a deposit or purchase price. First pay first served. We have been dissapointed in the past by customers and dealers on pre-orders not being followed through.
TRG - we had 6 DD 16" 300BLK uppers which were pre-ordered and sold. We have one rifle in 300BLK pre-ordered and coming in on this shipment. We can get more on pre-order and the lead time is a minimum of around 4 to 5 months to get DD rifles.
-
17-02-2014, 05:55 #5
- Join Date
- Sep 2013
- Posts
- 322
Re: Daniel Defense DDM4 stock arriving soon - The following will be available
I will contact Jacques to place a order for a 300 AAC
in mil spec + .
Many thanks
-
17-02-2014, 09:29 #6
- Join Date
- Sep 2012
- Location
- South Africa
- Posts
- 960
-
17-02-2014, 12:39 #7
- Join Date
- Oct 2012
- Location
- At the Mountain
- Posts
- 5,551
Re: Daniel Defense DDM4 stock arriving soon - The following will be available
Thanks Khumba
-
17-02-2014, 12:46 #8
- Join Date
- Jul 2008
- Location
- Not where I want to be..
- Posts
- 12,596
-
17-02-2014, 13:40 #9
- Join Date
- Sep 2012
- Location
- South Africa
- Posts
- 960
Happy days!! Thank you Khumba & Jacques!
Oh and of course HBA!
-
17-02-2014, 14:06 #10
- Join Date
- Nov 2010
- Age
- 37
- Posts
- 2,290
Re: Daniel Defense DDM4 stock arriving soon - The following will be available
Maybe I missed it, but what is the prices on these? I see your web store still says POR.
Similar Threads
-
[NEW IN] Daniel Defense Accessories - In stock @ Hailstorm
By Hailstorm in forum HAILSTORMReplies: 0Last Post: 08-05-2014, 00:48 -
Daniel Defense DDM4 ISR .300-AAC integrally-silenced rifle
By GameFarmer in forum AR DiscussionsReplies: 16Last Post: 20-03-2013, 10:24
Bookmarks