Results 1 to 5 of 5
Thread: Rust inside stainless Howa 1500
-
20-02-2023, 21:02 #1
- Join Date
- Jan 2015
- Location
- BRACKENFELL, CAPE TOWN
- Age
- 41
- Posts
- 1,034
Rust inside stainless Howa 1500
Hi guys,
Long time posting. Noticed some small rust spots inside my new Howa 1500 stainless. Inside the breech (where the bolt locks into place, just in front of the chamber). Top and on each side. Very small spots, so I must've missed them the first few times while cleaning. Had to get a Flashlight in there to see.
Doesn't seem to be any in the barrel or the chamber itself. I always keep my barrel oiled. Used Slip2000, now using Eezox. Since day one. So I'm pretty sure that's free of rust. Patches also come out clean.
Before reading up I used the old "0000 steel wool" and oil to remove most of the small spots inside the breech. But still some in the top I missed. I've used the oil and wool to effectively remove rust from blued guns before, but apparently it shouldn't be used on stainless.
My question is. Should I try the baking soda paste or citric acid to remove the spots? Obviously I can't dunk the entire gun in citric acid solution. So I thought if baking soda, which is pretty mild won't work, I'll try a past of citric acid.
Or is this best left to a gunsmith?
Any one have any experience with this?
Sent from my SM-G991B using Tapatalk
-
20-02-2023, 22:57 #2
- Join Date
- Jun 2017
- Location
- Pretoria
- Age
- 35
- Posts
- 1,661
Re: Rust inside stainless Howa 1500
using non-stainless steel on stainless will leave particles of metal behind that will rust and cause corrosion.
I cant see any harm trying water and baking soda. Or plain spirits vinegar. No first hand experience, but im sure the experts will chime in.
-
21-02-2023, 10:46 #3
- Join Date
- Apr 2013
- Location
- Bryanston, JHB
- Age
- 48
- Posts
- 490
Re: Rust inside stainless Howa 1500
Before you try anything too harsh, it wouldn't hurt to give the chamber a good scrub with a solvent like acetone or even WD40. Perhaps the brown stuff you see is some residual packing grease or lubricant from when the gun was assembled. Maybe that solves the issue!
-
21-02-2023, 12:26 #4
- Join Date
- Aug 2011
- Location
- Sandton
- Posts
- 8,339
-
21-02-2023, 15:10 #5
- Join Date
- Jan 2015
- Location
- BRACKENFELL, CAPE TOWN
- Age
- 41
- Posts
- 1,034
Re: Rust inside stainless Howa 1500
Thanks Oefpatrol and desperatezulu. I gave the area a pretty good scrub with the steel wool, washed that out with Q20 when I read you shouldn't. And then I used brass pots rubber around a 357 bronze brush. (that I normally use for leading in the rollie. Pretty sure it's rust by the random pattern and the color. But I'll give it another wack with a brush and some solvent to be sure.
Sent from my SM-G991B using Tapatalk
Bookmarks