Llama 9mmP (1911 clone) barrel broken

[mckg]

Your barrel might have broken because the feet impacted at their bottom rather than the top, close to the bed (under the chamber). A look at the frame's channel should show discoloration of the metal.

As a side note I own that other model of full size 1911ish Llama whose barrel does not tilt. Barrel and slide are not interchangeable. Plug. recoil spring and guide do in a Norinco as far as I remember. I would have to check the bushing. Slide stop axis is fatter on the LLama.

Llama mags, 9 and 45 are too big to fit in the Norinco. 1911 mags, 9/38/45 won't lock as is in that 9mm as they bump into the low ejector.

[Tacet]

https://wildebeesoutdoor.com/llama-9mmp-pistol
https://www.gunafrica.co.za/classifieds/pistols/pistols-semi-automatic-pistols/llama-9mmp-r4500-120677.html


I'm not knowledgable enough to say whether either is the XI version, but maybe worth asking.

[mckg]

https://wildebeesoutdoor.com/llama-9mmp-pistol
https://www.gunafrica.co.za/classifieds/pistols/pistols-semi-automatic-pistols/llama-9mmp-r4500-120677.html

I'm not knowledgeable enough to say whether either is the XI version, but maybe worth asking.

Small frames should be in .22/.32/.380 and have that awkward close grip angle, unfortunately copied by Eagle Imports/MAC when they resurrected Llama pistols. I have an Especial one made in '54, oddly in 9 Luger with a longish barrel, the more usual gift of the Especials.

https://www.americanrifleman.org/con...ing-stateside/

[Grandbo]

Your barrel might have broken because the feet impacted at their bottom rather than the top, close to the bed (under the chamber). A look at the frame's channel should show discoloration of the metal.

As a side note I own that other model of full size 1911ish Llama whose barrel does not tilt. Barrel and slide are not interchangeable.