Results 1 to 10 of 16
-
24-07-2015, 12:40 #1
- Join Date
- May 2011
- Posts
- 1,591
Mission First Tactical AR and AK Accessories - Full range
We are glad to announce our MFT shipment arrived, and we have full stock of most of the range. This is a popular brand in the USA, making excellent quality AR15 accessories.
Their Battlelink Minimalist stock is the lightest stock on the market, with a very solid fit (no play on this one!) and excellent handling.
Great review of them here: http://www.breachbangclear.com/revie...imalist-stock/
Mostly available in commercial tube size, but a few available for mil-spec tubes. Note that these are made to be tight, and some rifles with slightly oversize tubes may need them to be fitted slightly. We are happy to do this. We found commercial tubes in SA vary up to 0.5mm more than spec. Not an issue, but worth noting.
Mags and accessories are available in a range of colours. Mags are reliable with anti-tilt followers and lightweight, but strong. There are 30rnd ones, and a few 10 rnd ones for those who asked.
I'll quote on the mags:
The MFT Standard Capacity Polymer Magazine, is a 30 round 5.56 NATO magazine engineered as an enhancement of the standard STANAG design. The MFT stipple texture, low profile front ribs and flared floor plate aid in extraction and handling. The floor plate provides drop protection, has a paint pen dot matrix area for easy identification marking and is compatible with tight double and triple magazine pouches. Two fully functional drain holes ensure full and proper draining. Simple toolless disassembly with double floor plate safety release tabs allows user to safely release spring tension during disassembly and quick ammo dumps. Long-life stainless steel spring and four-way anti-tilt follower ensure reliable feeding. Oversized mag catch notch in the rear of the magazine provides enhanced reliability of the bolt catch operation. Quality and consistency are ensured by using a specially developed Military Grade reinforced, super tough polyamide And as always our products are MADE IN THE USA with a LIFETIME WARRANTY.
The Engage pistol grips feature textured finger swells (3) and back straps (3) allow the user to custom fit the grip to their own hand size and comfort. Very comfortable, and available for the AK as well as the AR15.
The React Magwell Grip (RMG) is a compact textured vertical grip designed for close hand hold application at the low ready or CQB situations. Designed to provide a positive grip surface with wet or gloved hands. Locates support hand forward of the magazine well to prevent injury should an overcharged round cause the ejection of the magazine.This grip also incorporates right and left handed pressure pad wells for wired switches and a spare battery storage compartment. This grip allows the support hand to apply rearward pressure keeping the weapon shouldered, yielding better muzzle control and accuracy. This is the grip you want if your objective is a close hold grip with added safety.
Pop in to see the range, or call for pricing and availability. Imports will be often and will cover the full range of products.
DSG
Last edited by DaveSheerGuns; 24-07-2015 at 12:44.
-
24-07-2015, 12:45 #2
- Join Date
- Jul 2014
- Posts
- 2,146
Re: Mission First Tactical AR and AK Accessories - Full range
DSG, are there any issues with fit of their stocks (or other parts) on the CQ-A?
-
24-07-2015, 15:01 #3
- Join Date
- May 2011
- Posts
- 1,591
Re: Mission First Tactical AR and AK Accessories - Full range
CQ-A is a commercial tube. Fits fine, but is a little tight as it should be. If you want it looser we will fit it for you. More stable and secure is preferred in the US to a sloppy fit that slides loosely.
DSG
-
24-07-2015, 15:39 #4
- Join Date
- May 2009
- Location
- Johannesburg
- Posts
- 6,444
Re: Mission First Tactical AR and AK Accessories - Full range
Fitted out a DM4 in full MFT trim yet?
-
24-07-2015, 15:48 #5
- Join Date
- May 2011
- Posts
- 1,591
Re: Mission First Tactical AR and AK Accessories - Full range
Yep. Photos next week
DSG
-
24-07-2015, 16:17 #6
- Join Date
- Sep 2012
- Location
- Kemptonpark
- Age
- 41
- Posts
- 920
Re: Mission First Tactical AR and AK Accessories - Full range
Anything that will fit a Type 56?
Specifically looking for fore-end and stock.
-
24-07-2015, 16:30 #7
- Join Date
- May 2011
- Posts
- 1,591
Re: Mission First Tactical AR and AK Accessories - Full range
They don't do a stock, but a very nice pistol grip with interchangeable backstraps and foregrip...
And a forend that is very nice. have both in stock.
http://missionfirsttactical.com/Prod...ngeable-straps
http://missionfirsttactical.com/Prod...ed-Rail-System
DSG
-
25-07-2015, 02:42 #8
- Join Date
- Jan 2011
- Location
- near the point!
- Posts
- 210
Re: Mission First Tactical AR and AK Accessories - Full range
That tekko fore end is awesome. Mail inbound to tj. It will fit on a Saiga?
-
25-07-2015, 09:19 #9
- Join Date
- Jun 2012
- Location
- Garden Route
- Posts
- 988
-
25-07-2015, 09:57 #10
- Join Date
- May 2011
- Posts
- 1,591
Re: Mission First Tactical AR and AK Accessories - Full range
The AK rail is R1500. I haven't tried it on a Saiga, so can only guarantee it on a regular AK47 or AKM, but it should be ok on a Saiga and we'll credit you if it does not fit as long as it is still new. Yes, it does look like a very nice option. I love the grip systems (AR15 and AK) with 3 front straps and 3 rear straps. Will have to see what needs to be done to make them work on an LM too.
DSG
Similar Threads
-
Tactical Stock for REM 700 XCR Tactical Long Range
By Bauermn in forum Tactical Rifles and CarbinesReplies: 5Last Post: 17-08-2011, 14:47 -
Is there such a thing as a range that will rent out full auto guns?
By shooter in forum General DiscussionReplies: 11Last Post: 30-12-2008, 21:02
Bookmarks